Fireplace Xtrordinair Elite 44

Description

The 44 Elite NexGen-Hybrid™ fireplace is a high-efficiency, clean-burning wood fireplace with a large firebox that can heat up to 3,000 square feet. It features a huge viewing area, Posi-Pressure technology, and a Classic Arch door that replicates the look of a traditional masonry fireplace.

NexGen-Hybrid™ technology reduces emissions, improves efficiency, and extends burn time, so you have to go to the woodpile less often. Here are some of the key features of the 44 Elite NexGen-Hybrid™ fireplace:
• Large firebox: Can heat up to 3,000 square feet
• Huge viewing area: Enjoy the view of the fire from anywhere in the room
• Posi-Pressure technology: Evenly distributes heat throughout your home
• Classic Arch door: Replicates the look of a traditional masonry fireplace
• NexGen-Hybrid™ technology: Clean burning, high efficiency, and longer burn times
If you are looking for a high-efficiency, clean-burning wood fireplace with a large firebox, the 44 Elite
NexGen-Hybrid™ is a great option. It is perfect for heating large spaces and will provide you with many
years of enjoyment.

Additional information

Single Page Flyer

Summer Fan Switch – Instructions
44 Elite Framing Worksheet
44 Elite Install Manual
Owner’s Manual
44 Elite Firebrick Order Form

• • Heating Capacity:* Up to 3,000 square feet
  • Maximum Burn Time: Up to 12 hours
  • Log Length: 32”
  • EPA Tested BTU Range**: 12,016 to 54,510 BTUs/Hr. (crib wood)
  • Cord Wood BTU Range 12,500 to 78,000 (cord wood)
  • Emissions: 1.1 grams/particulate per hour (crib wood)
  • Efficiency:** 81.3% HHV
  • Firebox: 4.2 cubic foot
  • Ceramic Glass Viewing Area: Double Door 14-3/8″ W x 18-1/4″ H (each side), 473.6 Sq. In.
    *Heating capacity will vary depending on the home’s floor plan, degree of insulation, and the outside temperature. It is
    also affected by the quality and moisture level of the fuel
    ** EPA tests to determine BTU output are performed with a single standardized load of dimensional lumber (crib fuel).
    When burning cord wood, the fireplace will achieve higher BTUs. The BTU output of the fireplace can be higher than the
    numbers established during EPA testing depending upon the quantity and species of wood being burned. Based on our
    in-house testing using cord wood, real world BTUs will typically fall between the cord wood numbers listed above This
    model was tested for efficiency using method B415.1-10. The overall efficiency of the heater may be lower if the heater is
    operated without a heat exchange blower or with the installed heat exchange blower turned off.